To avoid being blinded by an approching vehicle at night it is best to?

Keep your eyes to the left to avoid being blinded by the headlights of an oncoming vehicle. Keeping your eyes to the left means you're not looking directly at the light and it will enable you to see the edge of the road more clearly.

1. When blinded by an approaching motor vehicle at night it is best to?
2. When driving at night a driver should dim his/her headlights when an oncoming motor vehicle is within?
3. What is the best technique to use if you are approaching another driver with their high beams on quizlet?
4. When approaching an intersection you should never drive on the left half of the road within?
5. Why you should drive slower at night?
6. What should you do if you are blinded by the headlights on an approaching vehicle?
7. When should you drive at night?
8. When should you approach another car at night?
9. When driving at night and you encounter curves What do you have to remember?
10. What is the technique used for determining the proper following distance?
11. What does the smog technique refers to?
12. When approaching an intersection bridge or railroad you should never drive on the left half of the roadway when within how many feet?
13. When turning you should give the proper signal?
14. When approaching an intersection bridge or railroad crossing you should never drive on the left half of the roadway within how many feet?

When blinded by an approaching motor vehicle at night it is best to?

If blinded by an approaching motor vehicle at night, it is best to: Slow down and avoid looking directly into the lights of the approaching vehicle.

When driving at night a driver should dim his/her headlights when an oncoming motor vehicle is within?

If you are driving with your high-beam lights on, you must dim them at least 500 ft from any oncoming vehicle, so you don't blind the oncoming driver. You must use low-beam lights if you are within 200-300 ft of the vehicle you are following.

What is the best technique to use if you are approaching another driver with their high beams on quizlet?

If a car approaches you with high beams on, do not stare at the lights. Steer by the line at the outside edge of the road to keep yourself from being temporarily blinded.

When approaching an intersection you should never drive on the left half of the road within?

When approaching an intersection, bridge or railroad crossing, you should never drive on the left side of the roadway within: 100 feet.

Why you should drive slower at night?

Drive slower

One of the main reasons why you should drive slower at night is because of slower reaction times. With limited visibility, reacting to hazards, traffic signs, and other vehicles takes longer. By driving slower, you'll have more time to make the appropriate actions when necessary.

What should you do if you are blinded by the headlights on an approaching vehicle?

Explanation If you are driving at night and a vehicle is approaching with its high beams activated, quickly flash your headlights one time. If the other driver fails to dim their lights, look toward the right side of the road to keep from being blinded by their headlights.

When should you drive at night?

When driving at night, you should: A Adjust your speed to keep your stopping distance within your sight distance. "At night your headlights will usually be the main source of light for you to see by and for others to see you. You can't see nearly as much with your headlights as you see in the daytime.

When should you approach another car at night?

Your headlights only let you see about 350 feet ahead. Be sure you are driving slow enough to stop or turn if needed. Use your low beams when you come within 500 feet (about one block) of an oncoming vehicle. Also use your low beams when following another vehicle within 300 feet.

When driving at night and you encounter curves What do you have to remember?

When driving at night and you encounter curves, what do you have to remember? Well I am TOP HEAVY. So you should consider that 70 around a curve might not be the best speed this especially is depending on radius of the BEND. So SLOW DOWN for the curve and RESPECT others that are slowed down for the curve.

What is the technique used for determining the proper following distance?

The easiest and quickest way to calculate a safe following distance (the safe amount of distance between you and the car ahead of you) is to use the two-second rule. Basically, the two-second rule states that you should stay a full two seconds behind the car in front of you, whatever speed you are traveling at.

What does the smog technique refers to?

The SMOG technique (signal, Mirror, Over-the-shoulder, Go) refers to your car's exhaust emissions. False. Driving too quickly over a dip is not only tough on your car's suspension, it can cause you to lose control of your car.

When approaching an intersection bridge or railroad you should never drive on the left half of the roadway when within how many feet?

Do not pass:

Within 100 feet of an intersection bridge, tunnel, railroad crossing, or areas that could cause concern.

When turning you should give the proper signal?

You should signal at least 100 feet before you turn so the other drivers can be ready.

When approaching an intersection bridge or railroad crossing you should never drive on the left half of the roadway within how many feet?

When approaching an intersection, bridge, or railroad crossing, you should never drive on the left half of the roadway when within: 100 feet.