Silverado

What is the gear ratio for a 2000 Chevrolet silverado lt?

What is the gear ratio for a 2000 Chevrolet silverado lt?
  1. What is the LT package on a Silverado?
  2. Does VIN number tell gear ratio?
  3. Is an LT or LS better?
  4. What is the difference between LT and LS engines?
  5. What is the difference between Silverado LT and custom?
  6. How can I tell what gear ratio I have without pulling cover?
  7. Is a 3.73 axle ratio good for towing?
  8. How much can a 2000 Chevy Silverado 1500 pull?
  9. What kind of transmission is in a 2000 Chevy Silverado 1500?

What is the LT package on a Silverado?

LT = Luxury Touring. LTZ = Luxury Touring Z. The Z represents it is the highest trim level. Some of the other newer trim levels have meanings too. WT = Work Truck.

Does VIN number tell gear ratio?

The gear ratio is usually listed in the VIN code located on driver's door, the glove box, or the ID plate on the dashboard. Count the times a rear wheel goes around for one driveshaft turn: if its 3 1/2 it's a 3.50:1. Divide the number of teeth on the ring gear by the number of teeth on the pinion gear.

Is an LT or LS better?

The Difference Between LS and LT

The LS will add on extra amenities – often nicer interior or exterior upgrades or more premium technology. The LT follows after the LS, offering even better features at a slightly higher MSRP. While these features vary from model to model, you'll notice a more luxurious feel overall.

What is the difference between LT and LS engines?

LT stands for Luxury Touring. Like LS, though, this original meaning has become less important over time, and LT is basically used to signify that this particular vehicle is a step above the base trim level.

What is the difference between Silverado LT and custom?

Unlike the Custom, the LT comes standard with the turbocharged 2.7L four-cylinder engine and eight-speed automatic transmission. ... Inside, the cabin gains heated front seats, a heated steering wheel, and dual-zone automatic climate control. The touchscreen also goes up to 8-inches rather than 7-inches.

How can I tell what gear ratio I have without pulling cover?

So an easy way to determine your actual gear ratio is to check the tag attached to the differential cover by the cover bolts. On the tag there should be some numbering such as 3.54 or 3.73, either of those numbers will give you the stock axle ratio.

Is a 3.73 axle ratio good for towing?

FACT: A 3.73 axle ratio is ideal for towing heavy loads on flat terrain and will produce increased fuel economy during steady-state, long-distance highway driving.

How much can a 2000 Chevy Silverado 1500 pull?

2000 Chevrolet Silverado 1500 has the capacity to tow 8,700 to 9,400 pounds. The payload is 1,652 to 2,377 pounds. The torque is between 250 lbs.

What kind of transmission is in a 2000 Chevy Silverado 1500?

The 2000 Chevrolet Silverado 1500 transmission 4-speed automatic is common and works like most other automatic gearboxes of its time.

What country made Mack trucks?
Where are Mack trucks made? Every heavy-duty class 8 Mack truck built for the North American market is assembled at its Mack Lehigh Valley Operations ...
Why does the heat in my car only get hot when i mash on the gas hard?
Why does my heat only work when I hit the gas? You may also have a clogged heater core that may be prohibiting the outer linings of the heater core to...
How much for labor in replacing a heating core in a volks wagon?
How much is the labor to replace a heater core? Replacing the heater core can be an expensive job, and usually costs between $564 – $927 for parts and...