What is the oil to gas ratio for a 1997 Yamaha blaster?

You should be using 32:1.

1. What fuel does a Yamaha Blaster take?
2. What is the oil mixture for 50 to 1?
3. How much oil does a Yamaha Blaster take?
4. What is the gas mix ratio for a Yamaha Blaster?
5. Are Yamaha Blaster oil injected?
6. What type of gas does a banshee take?
7. What is the best 2 stroke mix ratio?
8. What is special about 2 stroke oil?
9. Does 40 to 1 have more oil than 50 to 1?
10. What oil should I run in my Yamaha Blaster?
11. How much gear oil do you put in a Yamaha Blaster?
12. What gear oil goes in a Yamaha Blaster?
13. What kind of spark plug does a Yamaha Blaster take?

What fuel does a Yamaha Blaster take?

straight gas 87octane, not like a banshee, a blaster is oil injected.

What is the oil mixture for 50 to 1?

For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas. For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas. For a 32:1 mixture, use 4 fluid ounces of oil per gallon of gas.

How much oil does a Yamaha Blaster take?

hey the blaster holds 650ml or 700ml if the engine has jjst been torn down it says how much it holds right behind the fill plug pretty much hope this helps:) I put 24 oz. in my sons Blaster after a change and it's right in the middle/top of the "sight glass".

What is the gas mix ratio for a Yamaha Blaster?

You should be using 32:1.

Are Yamaha Blaster oil injected?

the yamaha blaster is a oil injected bike, you put oil, Yamalube 2-s, in the tank under the seat... then you put gas in the tank... you dont have to worry about mixing anything... the only reason you would ever have to mix is if someone removed the oil injection system and put a block off plate on it.

What type of gas does a banshee take?

IF THE COMPRESSION IS 150 lbs to 165 lbs AT SEA LEVEL — you should run a minimum of 50/50 110 octane race fuel and 92 octane pump gas, but would be fine to also run straight race fuel. IF THE COMPRESSION IS GREATER THAN 165 lbs AT SEA LEVEL — you should use straight 110 octane race fuel.

What is the best 2 stroke mix ratio?

Use a 40:1 two-cycle oil mix ratio. One gallon of gasoline combined with 3.2 oz of two-cycle engine oil. Unsure of the age of your equipment? Use the 40:1 mixture.

What is special about 2 stroke oil?

A 2-stroke oil will lubricate the engine components by association with the fuel (either by mixing with it or by spraying during combustion), so this oil contains components that promote its combustion.

Does 40 to 1 have more oil than 50 to 1?

A 40:1 oil mix ratio means 40 units of gas for a single unit of oil drop. Likewise, in a 50:1 gasoline, there are 50 units of gas. So, a 40:1 oil mix is denser and lubricates better than 50:1.

What oil should I run in my Yamaha Blaster?

AMSOIL synthetic ATV lubricants are the choice of riders everywhere. AMSOIL is the Official Oil of the GNCC series. You can trust them to protect your ATV. Also, check out our customer reviews on amsoil.com to make the best choice for your Yamaha Blaster.

How much gear oil do you put in a Yamaha Blaster?

Gear case should use about . 69 quart. When you fill it go by your sight glass by the kick start lever. Once you get the oil in the mid to upper level, put the fill cap back on and start the bike.

What gear oil goes in a Yamaha Blaster?

In fact, Yamaha suggests to use either Yamalube 4 (10W-30) or an SAE 10W-30 type SE motor oil.

What kind of spark plug does a Yamaha Blaster take?

NGK Resistor Sparkplug BR8ES for Yamaha BLASTER 200 2001-2006 - Walmart.com.