Where can you find a drive belt diagram for a 2000 Rodeo?

1. Where can I get a belt diagram?
2. Where is the drive belt routing information?
3. How much does it cost to replace a serpentine belt?
4. Does a Holden Rodeo have a timing belt?
5. Where is the tensioner for the serpentine belt?
6. Can I change a serpentine belt myself?
7. How long does it take to change a serpentine belt?
8. When should the timing belt be changed on a Isuzu Rodeo?
9. How does an interference engine work?
10. Does Walmart do serpentine belts?
11. Can I drive without a serpentine belt?

Where can I get a belt diagram?

Where can I find a belt routing diagram for my engine? A: Commonly a belt routing diagram sticker is on the underside of the hood or in the engine compartment. If there is no diagram, make a sketch of the belt and pulleys before removing the belt. This will help you re-route the new belt correctly.

Where is the drive belt routing information?

To remove and install a new serpentine belt all that is required is knowing where the tensioner is located and a good breaker bar. Most vehicles nowadays usually have a belt routing sticker located somewhere in the engine compartment, making it even easier.

How much does it cost to replace a serpentine belt?

It is very inexpensive to replace a serpentine belt whether it's broken or loose. The replacement cost is only going to be between $100 and $200 in most cases. The belt itself will cost between $25 and $80 while the labor costs will probably be between $75 and $120.

Does a Holden Rodeo have a timing belt?

Having the timing belt replaced on your Holden Rodeo at the recommended intervals will ensure that your vehicle remains in good running condition. While the cost of having your Holden Rodeo timing belt replaced can be a bit of a shock, it's a lot cheaper than having to replace your engine due to a failure.

Where is the tensioner for the serpentine belt?

Locate the belt tensioner on the front of the engine. The belt tensioner will have a spring-loaded arm on one end and a round pulley on the other end. The belt tensioner will also have a bolt head in the center of the pulley. This bolt head is used to relieve the tension from the belt.

Can I change a serpentine belt myself?

Serpentine belt replacement is easy because today's automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.

How long does it take to change a serpentine belt?

It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.

When should the timing belt be changed on a Isuzu Rodeo?

When to replace the timing belt? Every 60k-90k miles. If an engine is equipped with a timing belt, the timing belt must be replaced at the service interval specified by the vehicle manufacturer regardless of whether or not any problem is visible, typically in the range of 60,000 to 90,000 miles.

How does an interference engine work?

Interference engines rely on timing gears, chains, or belts to prevent the piston from striking the valves by ensuring that the valves are closed when the piston is near top dead center.

Does Walmart do serpentine belts?

To summarize, Walmart offers replacement serpentine, timing, and fan belts under their warranties and will likely be able to manually install these at their automotive care workshops for you. If you do not have a warranty, you will be required to pay a fee depending on the state of the vehicle.

Can I drive without a serpentine belt?

Under no circumstances can you drive a vehicle without a serpentine belt because the serpentine belt serves the important function of delivering antifreeze to important parts of the engine. ... Without the serpentine belt, the power steering pump, which provides hydraulic pressure, no longer functions.