Vžig

Why wouldn't a 2001 eclipse start the lights and everything come on but when you push the clutch to start it nothing happens?

Why wouldn't a 2001 eclipse start the lights and everything come on but when you push the clutch to start it nothing happens?
  1. What does it mean if your car won't start but the lights come on?
  2. Why does my car not start but the battery is good?
  3. Why does my Mitsubishi Eclipse keeps turning off?
  4. What sensors can cause a car not to start?
  5. What fuse would cause my car not to start?
  6. Can a bad ECT cause no start?
  7. Will a crankshaft sensor keep a car from starting?
  8. Can a TPS sensor cause no start?
  9. Where is the ignition switch fuse?
  10. Where is the starter fuse located?

What does it mean if your car won't start but the lights come on?

Broken or Damaged Ignition

If your headlights can turn on, but your car won't crank, that means that your battery is charged, but either the starter or ignition is the problem. If the starter or ignition is the problem, a starter engine can be jumped by using a charged battery.

Why does my car not start but the battery is good?

If your vehicle won't start, it's usually caused by a dying or dead battery, loose or corroded connection cables, a bad alternator or an issue with the starter. It can be hard to determine if you're dealing with a battery or an alternator problem.

Why does my Mitsubishi Eclipse keeps turning off?

Common reasons for this to happen:

If the torque converter is broken, or if there is a low fluid level in the transmission, the converter will not do its job, and the car will be unable to maintain power at low speeds, which causes the engine to shut off.

What sensors can cause a car not to start?

A bad Crankshaft Position sensor is a common cause of no starts. The signal from this sensor goes to the PCM or ignition module that switches the ignition coil(s) on and off. If you have an RPM signal, a bad ignition module or PCM may not be switching the coil(s) on and off.

What fuse would cause my car not to start?

Faulty Fuse

A damaged or blown fuse can prevent power from reaching the starter relay, which is needed to provide the spark, the ignition, and the power to move your vehicle.

Can a bad ECT cause no start?

If you have starting problems and the 'check engine' light doesn't come on, you may have a bad engine coolant temperature sensor (ECT). They're quick and easy to replace.

Will a crankshaft sensor keep a car from starting?

Issues Starting the Vehicle

The crankshaft position sensor monitors the position and speed of the crankshaft and other parameters that play an important role when starting the engine. If the crankshaft position sensor is having a problem, the vehicle may have intermittent starting issues or not start at all.

Can a TPS sensor cause no start?

When a TPS goes bad, then the car's throttle body won't function properly. It could either stay shut or it won't close properly which is a severe issue. If it stays shut then your engine is not going receive air and it won't start.

Where is the ignition switch fuse?

The ignition relay is usually found in the fuse box situated underneath the hood or somewhere under the car's dashboard. It transfers electricity from the battery to the ignition components, which allows you to start the car in the blink of an eye.

Where is the starter fuse located?

It can be in the fuse box (also called a power box), the fuse panel under the dash, or on the right fender. Most cars will have it located under the hood, inside the long box with a black cover. Often called the fuse box, this is where a vehicle's fuses and relays are mounted.

How much does a heavy mack truck cost?
How much does a big Mack truck cost? The Mack Anthem is a versatile truck with day cab and sleeper options. Day cab models can start around $100,000, ...
Why would a car heater quit working and car over heat?
Why would my car overheat but the heater blows cold air? This can have a number of causes, with a faulty radiator cap being the most common. If you no...
Replace heater core in 1996 Jeep Cherokee?
Can I replace my heater core myself? Besides a new heater core, you'll also need coolant. You may need heater core hoses and hose clamps. ... Before i...